NEW! 6-Inch Long KME Gold Series Diamond Hones

NEW! 6-Inch Long KME Gold Series Diamond Hones
Item# 6-GS
Size: 

Product Description

NEW! 6-Inch Long KME Gold Series Diamond Hones

Size: 1" x 6" x 3/16"

“The Beast” 50 grit Gold Series diamond hone. The Beast is the most aggressive stone of any kind we’ve ever used. It will make even the toughest reprofiling and repair jobs much faster and easier. The Beast is so aggressive that we don’t recommend bringing edges to a full apex with it. Use The Beast for the major stock removal then switch to the 140 grit XC GS hone to finish shaping the cutting edge.

6-Inch Long KME Gold Series XXCoarse-100 grit Diamond Hone

Size: 1" x 6" x 3/16"

XXCoarse - 100 grit: The Metal Excavator. With a mixture of diamond particles ranging from 80 to 100 grit, this is the most aggressive hone of any kind we’ve ever used. Use it for major blade repair and serious reprofiling - or whenever large amounts of steel need to be removed quickly.

6-Inch Long KME Gold Series XCoarse-140 grit Diamond Hone

Size: 1" x 6" x 3/16"

XCoarse - 140 grit: The 140 grit hone is extremely aggressive and is perfect for most reprofiling jobs, moderate chip and blade repairs, and for quickly restoring the bevels and edges on extremely dull blades.

6-Inch Long KME Gold Series Coarse - 300 grit Diamond Hone

Size: 1" x 6" x 3/16"

Coarse - 300 grit: The 300 grit hone will produce true shaving sharp edges on even the hardest super-steels. While primarily used for everyday maintenance, it is aggressive enough for performing some minor reprofiling and very small chip repairs.

6-Inch Long KME Gold Series Fine - 600 grit Diamond Hone

Size: 1" x 6" x 3/16"

Fine - 600 grit: The 600 grit hone refines your edges, taking them from shaving sharp to true hair popping sharp. The 600 grit hone is often adequate as a first step for light edge maintenance.

6-Inch Long KME Gold Series X-Fine - 1500 grit Diamond Hone

Size: 1" x 6" x 3/16"

X-Fine - 1500 grit: The 1500 grit hone produces true razor edges while retaining just a bit of a toothy bite and will refine your edges to truly “showing off sharp”.

Like all our KME Gold Series diamond hones, the diamonds are so well attached to the base plate that we have yet to be able to wear one out. (And we sharpen lots of knives!)