KME Knife Sharpening System Generation II

Introducing the KME Generation II featuring a
new modular, interchangeable clamp system.

An exciting, patented advancement in knife sharpening systems!

That’s right, interchangeable jaws! We have 3 new sets of special purpose accessory jaws available right now and a couple of surprises still to come.

Set 1: KME Low Profile "Standard" Jaws

We replaced the original clamp jaws with the new low profile jaws late last year and all kits produced since September of 2013 include the updated low profile jaws as standard equipment.

The low profile standard jaws permit sharpening much smaller knives than the originals and also allow for much lower sharpening angles on all knives. ...and yes, they are compatible and will work in older models of the KME system.

With exceptional grip strength and increased stone clearance, the low profile standard jaws permit sharpening a wide range of blade sizes and shapes.

Saber grinds, full flat grinds, and even full hollow ground blades are held securely with no need to tape or shim the blades.

Order a set of the new low profile jaws here.

---

Set 2: KME Pen Knife Pro Jaws

You’ve been asking us for these for a long time!

We’ve been listening too so we’re introducing the Pen knife Pro Jaws designed specifically for sharpening very narrow traditional gentleman’s folders and pen knives ...and at very low bevel angles too.

Wait till you see what you can do with these!

Pictured are just a few samples of knives which previously have been difficult or impossible to sharpen with any traditional clamp type sharpening system ...but not anymore!

Saber grinds, full flat grinds, and even full hollow ground blades are held securely with no need to tape or shim the blades.

Using the KME Generation II with the Pen Knife Pro Jaws you can sharpen even the smallest blades at angles down to 17 degrees. ...and many knives can be sharpened at even lower angles than that.

How small and narrow of a blade can the Pen Knife Pro Jaws sharpen?

Here’s one of the smallest blades we could find:

Victorinox SD Classic
Blade: 1-5/16” long x .228” wide
Grind: Full flat
Lowest Setting: 17 Degrees
Actual Sharpening Angle: 17 Degrees

Order a set of the new Pen Knife Pro jaws here.

---

And for our bowhunting friends...

Set 3: KME Broadhead Jaws

We even have a set of Broadhead jaws for sharpening your 2 blade broadheads! Now you can use your KME knife sharpener to sharpen your 2 blade broadheads and duplicate almost any factory bevel angle. The broadhead jaws are cut at an angle so you simply put the broadhead in the jaws with the ferrule tight against the jaws each time.

With the broadhead jaws sharpening broadheads is as easy as sharpening a knife!

Order a set of broadhead jaws here.

To see how easy it is to change jaws in the KME Knife Sharpener - check out the video below.